How to cut off the extra lace for a seamless hairline?

    Hi there, we are UWigs. Today's blog will show you some best techniques for cutting the lace and what to use for cutting, especially if you're working with transparent lace wigs

    If you are a beginner at cutting the lace, and you don't know what to do when it comes to the lace, you get the extra lace all around the cap, the lace can hang over the ears, or the cap can be too big. So keep on reading, we will show you how to adjust that.

How to cut the extra lace off lace wigs for seamless hairline|UWigs

 Choose the best scissors.

    If you plan to use just some shears, make sure they are very sharp. Small scissors would be better because it's going to help you get that detail. Besides, we also want to use a razor. It will help you get as close as possible to the hairline.

 Step 1: Cut the lace in the back of the wig off

    As far as the lace in the back, we don't need it. So we want to make sure that we get rid of the extra lace in the back of the cap before applying the lace wig. That way, we won't have excess lace hanging at the back of our neck. So cut away that lace in the back before putting on the lace wig.

 Step 2: Pressing out the hair around the hairline 

    Ensure all of the hair is pushed out of the way before cutting the lace in the front. 

 Step 3: Cut the ear tab area properly

    First of all, we use a regular shear to cut the ear tab area properly. Because this area is not so important, it is not going to be seen. And when doing this, make sure you're not cutting it wrong because we don't want to lose a chunk of hair. 

    I know you may have had this problem, where sometimes you glue down your lace front wig, you have a perfect application of your lace front wig. However, the area around the ear is the first to lifts, which means that you may not have cut the lace deep enough, where it'll go over the ear.

 Step 4: Cut the front lace

    Make sure that hair is pushed out of the way before cutting. If you plan to tweeze your hairline or anything, it would better do that before cutting the lace off. Because after you cut the lace off, it makes it a little bit more difficult.

    Put a slit in the middle of this lace at first but not touch the hairline at all. And then put a slit on the left and the right sides. Then, pull the lace up and start where we put the slits and gently snip to get as close to the hairline as possible. Use the ends of the shears instead of taking the entire scissor. Because it's going to have lace leftover, we don't want leftover, so use the ends of these shears. And most importantly, cut it gently, making sure not to cut off the sideburn area.

    That is all you need to know about cutting extra lace off around ears, front, and back. Plus, the best celebrity secrets for using the correct scissors to properly cutting off the lace for a seamless hairline! I hope you enjoy this blog. If you have any questions or requirements, please contact us; we will do our best to serve you.


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


You may also like

View all
Example blog post
Example blog post
Example blog post